Extra 5% off when ordering full set that consists of printer, labels and ribbons.
Label printer cab SQUIX 4.3 MT 300 dpi
The textile printer cab SQUIX MT for printing on textile tapes. It is also possible to print on labels or continuous materials that are wound on rolls or reels. It is equiped witd an additional separating roller. At high heat energy the ribbon can stick with the textile tape. A roller reliably separates the material from the ribbon. Print head 4.3 – durable, for rough surroundings and thermal direct printing. 2-year warranty applies (warranty is valid only if the genuine consumables are used). Manufacturer – cab (Germany).
Technical data
Print method | Thermal direct (models 4.3) / Thermal transfer | |||
---|---|---|---|---|
Print head type | 4.3 | 4.3 | 4 | 4 |
Printable resolution, dpi | 203 | 300 | 300 | 600 |
Print speed up to mm/s | 250 | 250 | 300 | 150 |
Print width up to mm | 104 | 108,4 | 105,6 | 105,6 |
Print start. Distance to locating edge mm | 2,8 | 1,2 | 2,0 | 2,0 |
Material thickness | Labels – from 0,03 to 0,6 mm Continuous material – from 0,05 to 0,5 mm Carrier material from 0,03 to 0,13 mm Weight (cardboard) up to 300 g/m2 | |||
Label width, mm | 20-116 | |||
Label height, mm | 6-2000 | |||
Continuous material or carrier material width, mm | 24-120 | |||
Ribbon roll diameter up to | 80 mm (about 450 m) | |||
Label roll outside diameter with core diameter up to | 205 mm/ core diameter from 38 to 100 mm (with adapters) | |||
Interfaces | RS232, USB 2.0, Ethernet 10/100, 3 USB (for memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick) | |||
Software | Cablabel R2+ for label designing and printing; Windows, Mac, Linux drivers |
Versions
|
|
|
SQUIX basic, material guide left-aligned | SQUIX peel-off version P, material guide left-aligned | SQUIX M basic, material guide centered |
|
|
|
SQUIX M peel-off version P, material guide centered | SQUIX M RFID, RFID label printing, material guide centered | SQUIX MT textile printer, material guide centered with separator |
Features
Ribbon holder- Easy insertion of the ribbons is enabled with the three-part tightening axles. A preprinted ruler simplifies the adjustment.
- Roll holder
- When setting the margin stop, the material roll is automatically centered. If rolls with 100 mm core diameter are processed, an adapter is recommended.
- Plungers
- Both plungers are fixed for all material widths. No print head settings or adjustments are necessary.
- Antistatic brush
- Particularly with plastic materials the electrostatic charge is discharged after printing.
- Separator
- At high heat energy the ribbon can stick with the textile tape. A roller reliably separates the material from the ribbon.
- Material guide
- The material guide just in front of the print roller provides accurate imprint. The material width is adjusted with a spindle.
- Print rollers’ coating
- Synthetic rubber is standard for accurate imprint; silicone is available as an option for an extra long service life at a higher imprint tolerance
- Slim print rollers
- In order to achieve accurate imprint with slim materials and ribbons slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed. Coating: synthetic rubber
Video
Introducing of the new thermal transfer printers Squix line