Extra 5% off when ordering full set that consists of printer, labels and ribbons.
Label printer cab SQUIX 4 M 300 dpi
The best-selling industrial device with a wide range of accessories.
The accurate and versatile Squix M printer is suitable for printing on all materials that are wound on rolls or reels or fanfold – especially very small labels or slim continuous materials such as pressed shrink tubes.
Print head 4.3 – durable, for rough surroundings and thermal direct printing.
2-year warranty applies (warranty is valid only if the genuine consumables are used).
Manufacturer – cab (Germany).
Technical data
| Print method | Thermal direct (models 4.3) / Thermal transfer | |||
| Print head type | 4.3 | 4.3 | 4 | 4 |
| Printable resolution, dpi | 203 | 300 | 300 | 600 |
| Print speed up to mm/s | 250 | 250 | 300 | 150 |
| Print width up to mm | 104 | 108,4 | 105,6 | 105,6 |
| Print start. Distance to locating edge mm | 2,8 | 1,2 | 2,0 | 2,0 |
| Material thickness | Labels – from 0,03 to 0,6 mm Continuous material – from 0,05 to 0,5 mm Carrier material from 0,03 to 0,13 mm Weight (cardboard) up to 300 g/m2 |
|||
| Label width, mm | 20-116 | |||
| Label height, mm | 6-2000 | |||
| Continuous material or carrier material width, mm | 24-120 | |||
| Ribbon roll diameter up to | 80 mm (about 450 m) | |||
| Label roll outside diameter with core diameter up to | 205 mm/ core diameter from 38 to 100 mm (with adapters) | |||
| Interfaces | RS232, USB 2.0, Ethernet 10/100, 3 USB (for memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick) | |||
| Software | Cablabel R2+ for label designing and printing; Windows, Mac, Linux drivers | |||
More information about thermal transfer printers cab SQUIX:
Versions
 |
 |
 |
| SQUIX basic, material guide left-aligned |
SQUIX peel-off version P, material guide left-aligned |
SQUIX M basic, material guide centered |
 |
 |
 |
| SQUIX M peel-off version P, material guide centered |
SQUIX M RFID, RFID label printing, material guide centered |
SQUIX MT textile printer, material guide centered with separator |
Also version with cutter is available:
Features
- Hinged cover
The two-part cover made of impact-proof plastics folds when it is opened. Therefore, only little footprint is needed. The large panoramic window enables to check the material consumption and to track the full printing process. - Rugged metal chassis
Made of cast aluminum; basis to assemble all components. - Peel-off function (optional)
Via the peel-off plate, the label is separated from the carrier material. Accurate imprint and dispense are achieved with the powered rewind assist roller and the pinch roller. - Periphery connection
Additional modules are easy to connect. All peripheral devices are plugged to the printer with two pins and fixed with a screw. - Ribbon holder
Fast and easy exchange of the ribbon is enabled with the three-part tightening axles. - Roll holder
The spring-mounted margin stop with a screw cap enables constant tension during material feed and therefore improves accurate imprint. If rolls with 100 mm core diameter are processed, an adapter is recommended. - Internal rewinder (optional, only for printers with peel-off function)
Peel-off versions allow to rewind labels or carrier materials with or without a cardboard core. The three-part tightening axle provides easy material handling. - Rocker
When printing is started, the spring-mounted rocker with pulleys made of Teflon dampens the tension and therefore improves accurate imprint.
Printing in stand-alone operation
This operating mode is the printer’s ability to select and print labels even when it is not connected to a host system.
The label has to be designed with a software such as cablabel S3 or by direct programming with a text editor on a PC. Label formats, texts, graphics as well as database contents are stored on a memory card, a USB memory stick or in the internal IFFS memory.
Only variable data are sent to the printer via a keyboard, a barcode scanner, scales or other host systems and/or recalled by the Database Connector
Video
Introducing of the new thermal transfer printers Squix line
How to insert labels in to label printer SQUIX (basic version)
