TML

Printers cab SQUIX 8.3

tml
Printers cab SQUIX 8.3

Printers cab SQUIX 8.3

ModelsSpecificationsSpare PartsAccessoriesVideo

SQUIX 8 Models

SKUNamePrintersPrinting resolutionPrint TechnologyPriceBuy
5977068++Printers cab SQUIX 8.3SQUIX 8.3300 dpidirect thermal, thermal transfer €3,897.00

Specifications

SQUIX technical data: comparison of all models (EN, PDF)

Description in development.

  SQUIX 8.3
Print type direct thermal transfer and thermal transfer printing

Features

Features and device cab SQUIX

  1. Translucent lid
    The lid consists of two parts and is made of impact-resistant plastic. When opened, it folds to take up less space. A large window allows you to control the material consumption and monitor the entire printing process.
  2. Strong metal chassis
    Made of cast aluminum. All components are mounted on a robust chassis.
  3. Label peel-off function (optional)
    The label is separated from the substrate using a special plate. Auxiliary rollers for winding the substrate ensure accurate printing and application (when using an applicator).
  4. Interface for connecting peripheral devices
    Convenient connection of additional modules. All peripheral devices are connected to the printer using two protrusions and fixed with one screw.
  5. Ribbon holders
    Shafts consisting of three diverging parts provide quick and easy replacement of ribbon rolls.
  6. Material roll holder
    A roll stopper with a spring mechanism holds the material roll during unwinding, which ensures high printing accuracy. For heavy rolls with a spool diameter of 76 to 100 mm, it is recommended to use special adapters.
  7. Internal winder (optional, only on models with label peeling)
    It can be used to wind both an empty backing after peeling off labels, and a roll of finished printed labels without a spool (an additional winding plate is needed). The shaft, consisting of three diverging parts, ensures convenient roll removal.
  8. Rocking mechanism
    A reliable rocking mechanism with Teflon rollers compensates for tension at the start of printing, which increases printing accuracy.

Autonomous operation

Label designs are created using a special program or directly from a PC. Label formats, fonts and images, as well as variable data files are copied to an SD memory card, a USB flash drive or to the printer’s built-in memory (IFFS). Before printing, the necessary data is entered into the printer from the keyboard, using a barcode scanner, or sent from a computer.

Spare Parts

Thermal heads

SKUNamePriceBuy
5954105.001+cab SQUIX, X, A+ print heads - A2+, 300 dpi, thermal transfer€410.00
5958686.001+cab SQUIX, X, A+ print heads - A2+, 600 dpi, thermal transfer€560.00
5954085.001+cab SQUIX, X, A+ print heads - A4+, 203 dpi, direct thermal, thermal transfer€390.00
5954081.001+cab SQUIX, X, A+ print heads - A4+, 203 dpi, thermal transfer€350.00
5954089.001+cab SQUIX, X, A+ print heads - A4+, 300 dpi, direct thermal, thermal transfer€490.00
5954072.001++cab SQUIX, X, A+ print heads - A4+, 300 dpi, thermal transfer€450.00
5954077.001+cab SQUIX, X, A+ print heads - A4+, 600 dpi, thermal transfer€880.00
5954217.001+cab SQUIX, X, A+ print heads - A6+, 203 dpi, thermal transfer€580.00
5954106.001+cab SQUIX, X, A+ print heads - A6+, 300 dpi, thermal transfer€740.00
5954107.001+cab SQUIX, X, A+ print heads - A8+, 300 dpi, thermal transfer€940.00
5977384.001+cab SQUIX, X, A+ print heads - SQUIX2, 300 dpi, thermal transfer€410.00
5977385.001+cab SQUIX, X, A+ print heads - SQUIX2, 600 dpi, thermal transfer€560.00
5977382.001++cab SQUIX, X, A+ print heads - SQUIX_4, 203 dpi, direct thermal, thermal transfer€390.00
5977383.001++cab SQUIX, X, A+ print heads - SQUIX_4, 300 dpi, direct thermal, thermal transfer€490.00
5977444.001++cab SQUIX, X, A+ print heads - SQUIX_4, 300 dpi, thermal transfer€450.00
5977380.001++cab SQUIX, X, A+ print heads - SQUIX_4, 600 dpi, thermal transfer€630.00
5977386.001+cab SQUIX, X, A+ print heads - SQUIX 6.3, 203 dpi, direct thermal, thermal transfer€580.00
5977387.001+cab SQUIX, X, A+ print heads - SQUIX 6.3, 300 dpi, direct thermal, thermal transfer€740.00
5987351.001cab SQUIX, X, A+ print heads - SQUIX 8.3, 300 dpi, direct thermal, thermal transfer€940.00

Pressing shafts

SKUNamePriceBuy
5954102.001++cab SQUIX, X, A+ print rollers - DR2€35.00
5954180.001++cab SQUIX, X, A+ print rollers - DR4€35.00
5953700.001++cab SQUIX, X, A+ print rollers - DR4-M25€45.00
5953701.001++cab SQUIX, X, A+ print rollers - DR4-M60€45.00
5953702.001++cab SQUIX, X, A+ print rollers - DR4-M80€45.00
5954245.001++cab SQUIX, X, A+ print rollers - DR6€55.00
5954103.001++cab SQUIX, X, A+ print rollers - DR8€73.00

Full list of parts

Full list of parts in development.

Accessories

External unwinders for rolls and spools

External unwinder EU

External unwinder EU for large rolls and reels ensures smooth material feed. Has a built-in brake and tensioner. Suitable for cab printers of the SQUIX series. Suitable for rolls with winding both inside (IN) and outside (OUT).

Read more

External vertical unwinder

Universal external unwinder for reels and rolls.
• case material: metal
• disc material: plastic
• coil width up to 110 mm
• coil diameter up to 400 mm
• internal landing diameters of coils: 22, 75 and 93 mm

More details

Additional equipment and spare parts

External control panel

1.8m USB cable
3m USB cable
5m USB cable

DRS4 Print Roller

For media up to 120mm wide, with silicone coating for maximum durability services.

Anti-static brush

The brush removes static charge that occurs during the printing process.

Adapter 100

For label rolls with a core diameter of 100 mm and an outer diameter greater than 180 mm.

SD memory card

8 GB

USB flash drive

8 GB

USB WLAN adapter

2.4 GHz 802.11b/g/n

USB WLAN adapter with antenna

2.4 GHz 802.11b/g/n + 5 GHz a/n/ac in infrastructure mode with rod antenna for extended reach

USB Bluetooth adapter

Barcode tester CC100 for linear and 2D code

The readability of a vertical or horizontal barcode is checked immediately after printing. If an unreadable code is detected, printing is stopped to remove the label. The tester can be used with a stripper, peeler and external rewinder.

Connecting wiresод

RS232 C Connecting Cable

9/9 pin, 3 meters long

Special Covers and Protective Cases

Conductive covers for ESD zones

Available for all SQUIX series printers.

 

To protect against electrostatic discharge, the hinged cover is made of conductive plastic. Thanks to the use of carbon fiber, the cover is very robust and complies with ESD standards.

On request, the entire housing can be made of conductive material.

ESD compliance according to DIN EN 61340-5-1:2016

Surface resistance according to DIN IEC 60093 ≤ 104 Ohm; the charge is reduced from 1000 V to 100 V in less than 2 seconds.

Food industry lids

Available for all series printers SQUIX.

 

The lid contains iron chips. Thus, fragments of the lid can be detected by a metal detector or an X-ray scanning system.

The blue surface of the lid serves for easy visual detection among food products.

On request, the entire body can be made of material with iron chips.

The material complies with food industry regulations such as EU no. 10/2011 and FDA CFR 21 177.2600.

Food Industry Stainless Steel Sealed Enclosure

Available for SQUIX 4 printers, for SQUIX 6 — on request.

 

To get the finished label, you need to open the front cover.

To replace consumables and service the printer, the front part of the case opens and the platform with the printer extends on telescopic rails. When cleaning the housing with a steam generator, the cover on the front part must be closed.

Optionally, the housing can be equipped with temperature and humidity control sensors.

Protection class IP69K, according to EN 60529.

Dust-proof housing for dusty rooms

Available for SQUIX printers 4, for SQUIX 6 — on request.

 

To get the finished label, you need to open the front cover.

Inside the case there is a fan equipped with a filter to create excess pressure — this prevents dust from getting inside the chassis.

Protection class IP52, according to EN 60529.

Label peeling

PS800 Label Sensor

For left-aligned models

The sensor detects the label in peel-off mode. After removing the label from the backing, the next one peels off automatically.

Label width from 16 mm
Label height from 6 mm
Distance to the positioning corner 7 mm

PS900 Label Sensor

For models with left or center alignment

The sensor detects the label in peel-off mode. After removing the label from the backing, the next one peels off automatically.

Label width from 4 mm
Label height from 6 mm
Left alignment: Distance to the positioning corner from 12 to 60 mm
Center alignment: center alignment

DP410 Label Peel-Off Plate

For labels with strong adhesive and labels with thick backing. Label sensor is not applicable.

Light label presence sensor

Light barrier for automatic product detection on a conveyor belt.

Interfaces, switches

I/O interface

Labeling starts with a PLC signal from a sensor or a manual switch. It can simultaneously send a message about the device status or error. It is standard for printers with a peel-off device, and for basic printers it is an option.

I/O interface connector, SUB-D 25 pin

allows you to connect controllers to supply a signal to the I/O interface.

Label selection – I/O box

Up to 16 different labels per box can be selected from the memory card by a master control, e.g. PLC. Two boxes can be connected. The I/O box allows simple PLC control processes with four inputs and outputs each via abc programming.

TR2 Hand Switch

for connecting to the I/O interface

Foot switch

for connecting to the I/O interface

Cutting, punching

CU cutter

The CU cutter serves for cutting off after printing: paper labels, self-adhesive labels, cardboard, textile or plastic tapes and heat-shrinkable tubes.

A tray under the cutter for collecting cut labels with a capacity of ~50 labels

Cutter CU200 CU400 CU600
For use with the printer SQUIX 2 SQUIX 4.3
SQUIX 4		 SQUIX 4.3 M
SQUIX 4 M
SQUIX 4.3 MT
SQUIX 4 MT		 SQUIX 6.3
Material width up to, mm 67 120 114 180
      cardboard density g/m2 60 – 300
      thickness, mm 0.05 – 1.1
Cutting length from, mm 5
Gap height between labels up to, mm 2.5
Cuts per minute up to 100
Printing stops if final cutter position is reached
Tray under cutter
Label height up to, mm – 100 –

PCU400 Perforating Cutter

Roll materials such as heat shrink tube and textile tape are perforated after printing for manual separation later. Materials can also be cut.

Perforation cutter PCU400/2,5 PCU400/10
For use with printer SQUIX 4.3, SQUIX 4, SQUIX 4.3 M, SQUIX 4 M, SQUIX 4.3 MT, SQUIX 4 MT
Perforation: Web distance mm 2.5 10
Perforation: Web width mm 0.5
Material: width up to, mm 85
Material: Weight cardboard g/m2 60 – 300
Material: thickness, mm 0.05 – 1.1
Cutting length from, mm 5
Gap height between labels up to, mm 2.5
Cuts per minute up to 100
Printing stops if final cutter position is reached

Label rewinding

Rewinding labels onto a regular roll and onto a cardboard core.

RG guide plate for internal rewind

Internal rewind of the liner into a roll is available for printers with a label peeler. For this purpose, the peeler plate is replaced with the RG guide plate.

Guide plate RG200 RG400
For use with the printer SQUIX 2P SQUIX 4.3 P
SQUIX 4 P		 SQUIX 4.3 MP
SQUIX 4 MP
Material width up to, mm 67 120 114
Roll diameter up to, mm 142
Axis for core diameter, mm 38.1 – 40
Winding external

ER1, ER2 external rewinders for direct connection to the printer

The rewinder is mechanically connected to the label printer. Internal or external rewinding of the label roll is available. The pressure lever ensures tight and neat winding.

External winder ER1/210 ER2/210
For use with printer SQUIX 4.3
SQUIX 4, SQUIX 4.3 M
SQUIX 4 M		 SQUIX 6.3
Material width up to, mm 120 180
Roll diameter up to, mm 205
Axle for core diameter, mm 76
Winding internal or external

External ER4, ER6 rewinders with built-in power supply

The rewinder can be connected to any printer. Internal or external rewinding of the label roll is available. The pressure lever ensures tight and neat winding.

External winder ER4/300 ER6/300
For use with printer SQUIX 4.3
SQUIX 4
SQUIX 4.3 M
SQUIX 4 M		 SQUIX 6.3
Material width up to, mm 120 180
Roll diameter up to, mm 300
Axle for core diameter, mm 76
Winding internal or external
6.7 adapter for
ER4, ER6 for SQUIX
ER4, ER6 and EU4, EU6 for SQUIX

Label applicators and dispensers

Label applicator S1000

The cab S1000 applicator paired with the SQUIX series printer is a cost-effective solution for semi-automatic labeling and is also suitable for in-line integration, with labels applied from top to bottom. After printing, the label is applied to the product to be marked using a stamp.

Applicator S1000-220 S1000-300 S1000-400
Cylinder stroke up to, mm 220 300 400
Stamp stroke below printer, mm 64 144 244
Air pressure, bar 4.5

More

Label applicator S3200

The cab S3200 applicator installed on the SQUIX series printer is a cost-effective solution for semi-automatic labeling. It is also suitable for vertical integration into a production line. With the S3200, printed labels are automatically applied to the product to be labeled. The presence of a rotating cylinder axis adjustable in the range from 45° to 90° in the horizontal plane allows you to vary the angle of gluing the label to the surface.

Other data on maintenance, operation, peeling, air pressure adjustment, and the work process are similar to the cab S1000 applicator.

Applicator S3200
Rotation angle from 45° up to 90°
Cylinder stroke up to, mm 30
Air pressure, bar 4.5

Stamps for gluing with pressure or compressed air are made according to the size of the label.

  Stamp for gluing with pressure Stamp for gluing with compressed air
A3200-1100 M3200-1100 A3200-2100 M3200-2100
Material alignment left edge centered left edge centered
Stamp size H x W (min), mm 72 x 60 72 x 60
Label width, mm 20-116 20-116
Label height, mm 5-80 10-80
Product surface flat
Product during labeling stationary stationary or moving

More details

Label Dispenser cab S5104

For labeling product packaging on a conveyor belt. The product sensor detects the start of labeling. Separation begins at the moment the next label begins to print. The conveyor belt speed must be synchronized with the label printing speed. A light barrier can be used as a product sensor.

Module S5104 S5106
For use with printer SQUIX 4.3, SQUIX 4 SQUIX 6.3
Material alignment left edge
Label width, mm 25-116 50-176
Label height, mm 25-200
Distance from print line to edge of separating plate, mm 336-518
Product surface flat
Product height fixed
Product during labeling moving, speed synchronized with printer
Cycle time, approximately* 60 labels per minute

* for a label 100 mm high, print speed 100 mm/s

More

Video

We recommend the channel cab on YouTube, playlist SQUIX.

Exit mobile version