Vinyl 2330 white semi-gloss, destructible tamper-evident
White vinyl 2330 seal sticker. Gets destroyed when trying to remove the label from the surface. Aggressive adhesive – can be used on rough surfaces.
| Main application | |
|---|---|
| Universal sealing material for sealing, protection against opening, unauthorized access and forgery of equipment, devices and other industrial products. Also it may be used as an inventory seal for equipment of long-term operation. Main users: manufacturers of parts, components and assemblies for the automotive industry; manufacturers of electronics and household appliances; inventory label. | |
| Material type | Vinyl, 50 microns |
| When you try to remove the label from the surface of the product it is destroyed. A fragile film with high resistance to moisture, oils and solvents. Due to its high elasticity it can be used for curved, uneven and cylindrical surfaces. The material is suitable for the production of small seals. Inapplicable for sealing surfaces that are moving relatively to each other. Is not scratch and abrasion resistant. |
|
| Operating temperature | From -40°С to +80°С (short-term up to +150°С) |
| Continuous exposure to this temperature does not change the appearance of the label and does not affect the effect of destruction. | |
| Adhesive (adhesive layer) | 25 microns |
| Acrylic adhesive of high holding capacity, designed for use on complex surfaces, including low-energy polymers and surfaces with powder coating. | |
| Color and appearance | White semi-glossy |
| Does not glare, does not gleam, does not fade. Provides high contrast of barcodes and graphics. | |
| Surface coating | |
| Semi-glossy coating for thermal transfer printing using resin-ribbons (see list of recommended names). The resulting image is resistant to moisture and solvents. Conventional printing methods (flexography, letterpress, screen printing) can also be used. | |
| Application of labels | |
| For best results, it is recommended to apply the label on a clean, degreased, dry surface, press or roll with a rubber roller, and incubate for 24 hours at room temperature. | |