Vinyl 3316 white semi-gloss, destructible tamper-evident
Sealing labels from white semi-gloss vinyl 3316. These sealing labels fall into pieces in case they were peeled off. It is impossible to take off a sealing label and transfer it as a whole. Aggressive adhesive – can be used on rough surfaces.
| Main application | Warranty label destructing on opening |
|---|---|
| The most versatile and “sensitive” sealing material. It is used for sealing, protection against opening, unauthorized access and forgery of equipment, devices and other industrial products, as well as an inventory seal for equipment of long-term operation. Primary consumers: manufacturers of parts, components and assemblies for the automotive industry; manufacturers of electronics and household appliances; inventory label. |
|
| Material type | Vinyl, 51µm |
| When you try to remove the label from the surface of the product it self-destructs. A fragile film with high resistance to moisture, oils and solvents. Due to its high elasticity it can be used for curved, uneven and cylindrical surfaces. The material is suitable for the production of small seals. Not applicable for sealing the surfaces that are moving relative to each other. Not resistant to scratches and intense abrasion. |
|
| Operating temperature | From -40°С to +93°С (short-term up to +150°С) |
| Continuous exposure to this temperature does not change the appearance of the label and does not affect the effect of destruction. | |
| Adhesive (adhesive layer) | 350, 20 microns |
| Analogue of adhesive 310. Solid adhesive for smooth, flat surfaces made of metal and some polymers. | |
| Color and appearance | White semi-glossy |
| Provides high contrast of barcodes and graphics. | |
| Surface coating | TT0 |
| Smooth coating for thermal transfer printing using resin-ribbons (see list of recommended names). The resulting image is resistant to moisture and solvents. Flexographic printing method, hot stamping, letterpress printing, screen printing can also be applied. | |
| Label application | |
| For best results, it is recommended to apply the label on a clean, degreased, dry surface, press or roll with a rubber roller, and incubate for 24 hours at room temperature. | |