Anaerobic Adhesives

Anaerobic adhesives 3M Rite-Lok are effective one-component industrial adhesives that cure on metal surfaces in the absence of oxygen. Used in the manufacture and repair of machinery, equipment and vehicles. Represented by threadlockers and pipe sealants, retaining compounds and gasket makers of various viscosity, strength, cure speed and color, for ease of use. Rite-Lok sealants are vibration, water and solvents resistant. They act quickly, do not loosen, do not evaporate, do not shrink, also they facilitate installation by lubricating joints.

Sriegių fiksatoriai Veleno įvorės fiksatoriai Vamzdžių sujungimų sandarintojai Tarpinių formuotojai
Threadlockers Retaining compounds Pipe sealants Gasket makers
Prevent self-unscrewing of nuts and loosening of threaded joints becouse of vibration. Seal, prevent leaks and corrosion.
TL22, TL43, TL62, TL70, TL71, TL72, TL77, TL90		 Used for assembling of bearings, gears, bushings and other cylindrical joints. Prevent deterioration, reduce stress in the joints.
RT41, RT38, RT48, RT20G		 Used as thread and pipe seals for pneumatic systems and pipelines instead of traditional PTFE tapes and pastes.
PS-65, PS-77, НР42		 Seal the rigid flange joints between surfaces that have a poor match. High viscosity for filling large gaps.
GM74, GM18, GM10
Features

Features:

Code Color Max. gap between surfaces, mm Viscosity, cps Fixing time, min Features
Screw fasteners
TL22 purple 0,25 5 000 ≤ 15 min. Low strength. For demountable joints, small diameter connections (D up to 6 mm) and for soft metals (brass).
TL43 light blue 0,30 14 000 ≤ 15 min. Universal fixative of medium strength.
TL62 red 0,25 7 000 ≤ 15 min. Quite high, but not the maximum strength. For larger non-separable joints (D up to 25mm).
TL70 green 0,20 500 ≤ 15 min. High-strength clamp for studs and bolts of large diameter.
Shaft fixing bushings
RT41 yellow-brown 0,20 500 15 min. Average strength. Allows bearing replacement and maintenance.
RT48 green 0,20 600 15 min. High strength for increased reliability of press-fit joints. For mounting gears on shafts.
RT38 green 0,25 2 500 ≤ 15 min. High strength. It is convenient for fastening couplings to shafts and fixing bushings.
RT20G yellow-green 0,40 20 000 15 min. Heat resistant (up to + 230 ° C). Works well on worn or poorly matched surfaces, requiring the filling of large gaps.
Hermetics of pipe joints
PS65 white 0,50 300 000 ≤ 120 min. Low strength. For low pressure pipelines D15-80mm with medium and coarse cylindrical and tapered threads.
PS77 yellow 0,25 48 000 15 min. Universal. For low pressure pipelines (up to 700kg / cm2) D15-80mm with medium and coarse cylindrical and tapered threads.
PS20G brown 0,20 500 15 min. High strength. For pipelines of hydraulic and pneumatic high pressure systems D <15mm with thin and medium thread.
Intermediate forming
GM18 red 0,50 500 000 35 min. High viscosity for filling large gaps.
GM10 orange 0,50 425 000 20 min. High viscosity and heat resistance (up to + 230 ° C).
GM74 orange 0,35 80 000 15 min. Universal.

No products were found matching your selection.