Scotch-Weld Polyurethane Reactive Adhesives
|
Due to the speed and comfort it does not stand out for traditional hot melt adhesives, but they offer an incomparably stronger adhesive! That’s why – hot melt glue reaches its highest strength after hardening, with polyurethane reactive adhesive after hardening, everything just starts. Further work is continued with a heated chemical reaction (temperature +121оС). The polyurethane reactive adhesive agent is used with a convenient and simple 3M PUR Easy 250 pneumatic applicator gun Applicator gun 3M PUR Easy 250. With its help, the thin, flexible and invisible glue thread is extracted, it allows to improve the fastening of details and the appearance and durability of products. PUR Easy 250 Applicator User Manual PUR pocket guide |
  |
ProductsFeatures
Scotch-Weld Polyurethane Reactive Adhesives
Features
| Code | Viscosity (at 121°C) | Open time | Set time | Tensile strength, kPa | Features |
|---|---|---|---|---|---|
| TE-030 | 16.000 | 1 min | 30 s | 26.100 | Extrudable with fast set time. Bond wood and selected plastics. |
| TE-031 | 13.000 | 2 min | 30 s | 26.800 | Extrudable with fast set time. Bond a wide variety of plastics, including polystyrene and polyacrylic. |
| TE-100 | 7.000 | 2 min | 1 min | 28.900 | Extrudable with medium set time. Low viscosity. Bond wood and selected plastics. Thin bond lines. |
| TS-230 | 9.000 | 4 min | 2,5 min | 22.700 | Sprayable/extrudable with long set time. Bond variety of plastics, including polystyrene and polyacrylic. Bond aluminum and glass to plastic and wood. |
| Physical properties of uncured adhesives | ||||
|---|---|---|---|---|
| Physical properties | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Application Temperature,°С | 121 | 121 | 121 | 121 |
| Viscosity at 121°С, cP | 16,000 | 13,000 | 7,000 | 9,000 |
| Color | White | White | White | White |
| Open time, min 1 | 1 | 2 | 2 | 4 |
| Set time, s 2 | 30 | 30 | 60 | 150 |
| Density, kg/m3 | 1040 | 1040 | 1052 | 1087 |
|
1 time of bonding a semi-cylindrical adhesive strip 3 mm wide on a nonmetallic substrate 2 the minimum time required to achieve a peel strength of 34 kPa |
||||
| Physical properties отвержденных адгезивов | ||||
| Physical properties | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Hardness1 | 60 | 50 | 61 | 45 |
| Modulus of elasticity2, kPa | 77,000 | 38,000 | 84,000 | 37,000 |
| Modulus of elasticity2 100%, kPa | 13,760 | 7,600 | 12,400 | 6,200 |
| Strength for normal rupture2, kPa | 26,100 | 26,800 | 28,900 | 22,700 |
| Relative elongation at break2,% | 725 | 725 | 675 | 700 |
|
1 measured on 2.3-2.8 mm thick bars 2 measured according yo ASTM D 638, on 0.28-0.43 thick films cured 7 days at 25°C temperature and 50% relative humidity |
||||
| Adhesive characteristics | ||||
| Overlap Shear Strength (kPa), tested at 23°C | ||||
| Substrate | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Pine | 1471 | 1681 | 1421 | 1571 |
| Polycarbonate | 96 | 1661 | 1351 | 1661 |
| Polyacrylate | 23 | 1351 | 51 | 94 |
| Polystyrene | 0 | 1141 | 0 | 87 |
| ABS | 96 | 1471 | 1221 | 1331 |
| Polyvinyl chloride (PVC) | 1221 | 1751 | 1221 | 1331 |
| Aluminum | 5 | 52 | 7 | 89 |
| Glass | 2 | 5 | 0 | 108 |
| 1 substrate failure | ||||
| Overlap Shear Strength (kPa), tested at 82°C | ||||
| Substrate | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Maple | 3,000 | 2,300 | 2,600 | 2,800 |
| Pine | 6,00 | 5,500 | 5,600 | 4,900 |
| Peel strength (N/cm) at 23°C | ||||
| Substrate | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Pine | 1471 | 1681 | 1421 | 1571 |
| Polycarbonate | 96 | 1661 | 1351 | 1661 |
| Polyacrylate | 23 | 1351 | 51 | 94 |
| Polystyrene | 0 | 1141 | 0 | 87 |
| ABS | 96 | 1471 | 1221 | 1331 |
| Polyvinyl chloride (PVC) | 1221 | 1751 | 1221 | 1331 |
| Aluminum | 5 | 52 | 7 | 89 |
| Glass | 2 | 5 | 0 | 108 |
| 1 substrate failure | ||||
| Plasticized Vinyl, T-Peel (piw), tested at 23°C | ||||
| T-Peel strength | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Initial | 19 | 28 | 21 | 28 |
| Aged at 71°С for 2 weeks | 30 | 38 | 38 | 38 |
| Climatic tests, shear strength (kPa) at 23°C, material – substrate | ||||
| Shear strength | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| Aging at 25°C and 50% air humidity for 15 days | 16,400 | 13,000 | 17,500 | 15,500 |
| Thermal cycle1 | 15,800 | 13,400 | 12,900 | 16,600 |
| Cure speed, shear strength (kPa) at 23°C, substrate – pine | ||||
| Time | ТЕ-030 | ТЕ-031 | ТЕ-100 | ТЕ-230 |
| 10 minutes | 5,500 | 2,300 | 4,700 | 2,000 |
| 1 hour | 7,800 | 4,200 | 7,700 | 3,600 |
| 24 hours | 13,000 | 13,000 | 14,400 | 10,100 |
|
Main test methods: Shear strength Measured on 25.4 mm x 100 mm piece and 3.2 mm (plastics) or 9.5 mm (wood) thick pieces. The overlapping area is 25.4 mm x 12.7 mm, the thickness of the adhesive layer is 75 – 150 μm. The shear rate is 5.1 mm / minute. Peel strength (angle 180 °) Measured on 25.4 mm x 203 mm piece of coton duck (canvas) bonded to 25.4 mm x 101.6 mm size and 3.2 mm thick substrates. The tearing speed is 5.1 mm / minute. Peel strength (angle 180 °) Measured on a 2.54 mm wide sample of plasticized polyvinyl chloride (PVC). The tearing speed is 5.1 mm / minute. |
||||
Showing all 6 results
Showing all 6 results