Thermal transfer printer SQUIX 4/300M


Thermal transfer printer SQUIX 4/300M industrial, print resolution 300dpi

SKU: 5977010


Extra 5% off when ordering full set that consists of printer, labels and ribbons.

Label printer cab SQUIX 4 M 300 dpi

The best-selling industrial device with a wide range of accessories.
The accurate and versatile Squix M printer ir suitable for printing on all materials that are wound on rolls or reels or fanfold – especially very small labels or slim continuous materials such as pressed shrink tubes.
Print head 4.3 – durable, for rough surroundings and thermal direct printing.
2-year warranty applies (warranty is valid only if the genuine consumables are used).
Manufacturer – cab (Germany).

Technical dataVersionsFeaturesVideo

Technical data

Print method Thermal direct (models 4.3) / Thermal transfer
Print head type 4.3 4.3 4 4
Printable resolution, dpi 203 300 300 600
Print speed up to mm/s 250 250 300 150
Print width up to mm 104 108,4 105,6 105,6
Print start. Distance to locating edge mm 2,8 1,2 2,0 2,0
Material thickness Labels – from 0,03 to 0,6 mm
Continuous material – from 0,05 to 0,5 mm
Carrier material from 0,03 to 0,13 mm
Weight (cardboard) up to 300 g/m2
Label width, mm 20-116
Label height, mm 6-2000
Continuous material or carrier material width, mm 24-120
Ribbon roll diameter up to 80 mm (about 450 m)
Label roll outside diameter with core diameter up to 205 mm/ core diameter from 38 to 100 mm (with adapters)
Interfaces RS232, USB 2.0, Ethernet 10/100, 3 USB (for memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick)
Software Cablabel R2+ for label designing and printing; Windows, Mac, Linux drivers

More information about thermal transfer printers cab SQUIX:


 Etikečių spausdintuvas Squix bazinis modelis  Etikečių spausdintuvas Squix su dispenceriu  Etikečių spausdintuvas Squix centrinis lygiavimas bazinis modelis
SQUIX basic,
material guide left-aligned
SQUIX peel-off version P,
material guide left-aligned
SQUIX M basic,
material guide centered
 Etikečių spausdintuvas Squix centrinis lygiavimas su dispenceriu (atklijuotuvu)  Etikečių spausdintuvas Squix centrinis lygiavimas RFID  Etikečių spausdintuvas Squix centrinis lygiavimas tekstilinėms juostoms
SQUIX M peel-off version P,
material guide centered
RFID label printing, material guide centered
SQUIX MT textile printer,
material guide centered with separator


Terminio pernešimo spausdintuvas cab Squix

  1. Hinged cover
    The two-part cover made of impact-proof plastics folds when it is opened. Therefore, only little footprint is needed. The large panoramic window enables to check the material consumption and to track the full printing process.
  2. Rugged metal chassis
    Made of cast aluminum; basis to assemble all components.
  3. Peel-off function (optional)
    Via the peel-off plate, the label is separated from the carrier material. Accurate imprint and dispense are achieved with the powered rewind assist roller and the pinch roller.
  4. Periphery connection
    Additional modules are easy to connect. All peripheral devices are plugged to the printer with two pins and fixed with a screw.
  5. Ribbon holder
    Fast and easy exchange of the ribbon is enabled with the three-part tightening axles.
  6. Roll holder
    The spring-mounted margin stop with a screw cap enables constant tension during material feed and therefore improves accurate imprint. If rolls with 100 mm core diameter are processed, an adapter is recommended.
  7. Internal rewinder (optional, only for printers with peel-off function)
    Peel-off versions allow to rewind labels or carrier materials with or without a cardboard core. The three-part tightening axle provides easy material handling.
  8. Rocker
    When printing is started, the spring-mounted rocker with pulleys made of Teflon dampens the tension and therefore improves accurate imprint.

Printing in stand-alone operation
This operating mode is the printer’s ability to select and print labels even when it is not connected to a host system.
The label has to be designed with a software such as cablabel S3 or by direct programming with a text editor on a PC. Label formats, texts, graphics as well as database contents are stored on a memory card, a USB memory stick or in the internal IFFS memory.
Only variable data are sent to the printer via a keyboard, a barcode scanner, scales or other host systems and/or recalled by the Database Connector


Introducing of the new thermal transfer printers Squix line

How to insert labels in to label printer SQUIX (basic version)

More videos how to use and maintain thermal transfer printers Squix on official manufacturer’s youtube channel.

Additional information


Squix 4